{"title":"Tie Rods + Drag Links","description":"","products":[{"product_id":"cognito-extreme-duty-tie-rod-center-link-kit-for-01-10-silverado-sierra-1500hd-3500hd-01-13-gm-2500-suvs-03-09-hummer-h2","title":"Cognito Extreme Duty Tie Rod Center Link Kit For 01-10 Silverado\/Sierra 2500\/3500 2WD\/4WD","description":"\u003cp\u003eNew Alloy Steel Extreme Duty Center Link And Tie Rods Direct Bolt In Complete Replacement For Stock Center Link And Tie Rod Assemblies.\u003c\/p\u003e\n\u003cp\u003eAlso Converts The Stock Style Inner Tie Rod Joint From A Ball And Socket Axial Loaded Joint To A Radial Loaded Joint Which Is Significantly Stronger And Offers More Articulation than OE. For use Only in OEM position. Not for use with lift kits that use a dropped center link. Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlloy Steel Extreme Duty Center Link\u003c\/li\u003e\n\u003cli\u003eConverts the stock style inner tie rod joint from a ball and socket axial loaded joint to a radial loaded joint.\u003c\/li\u003e\n\u003cli\u003eSignificantly stronger than factory\u003c\/li\u003e\n\u003cli\u003eOffers more articulation than factory\u003c\/li\u003e\n\u003cli\u003eDirect bolt in complete replacement for stock center link and tie rod assemblies\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":46955120656621,"sku":"110-90285-GFGQ","price":729.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/cognito-motorsports-truck-cognito-extreme-duty-tie-rod-center-link-kit-for-01-10-silverado-sierra-2500-3500-2wd-4wd-41443092201709.jpg?v=1726337681"},{"product_id":"cognito-alloy-series-tie-rod-kit-for-11-20-silverado-sierra-2500hd-3500hd","title":"Cognito Alloy Series Tie Rod Kit For 11-23 Silverado\/Sierra 2500\/3500 2WD\/4WD","description":"\u003cp\u003eThe Cognito Alloy Series Tie Rod kit is a Heavy-Duty stock replacement upgrade where the inner joint incorporates an oversized alloy ball and socket. Sold as a Pair. Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDue to the larger inner joint, longer sway bar end links may be necessary for stock or lifted vehicles to avoid contact with the sway bar while turning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlloy Series Tie Rod Kit For 11-23 Silverado\/Sierra 2500\/3500 2WD\/4WD\u003c\/li\u003e\n\u003cli\u003eSignificantly stronger than factory\u003c\/li\u003e\n\u003cli\u003eOffers more articulation than factory\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":46955120787693,"sku":"110-90284-GFGQ","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/cognito-motorsports-truck-cognito-alloy-series-tie-rod-kit-for-11-23-silverado-sierra-2500-3500-2wd-4wd-41443092234477.jpg?v=1726338591"},{"product_id":"cognito-alloy-series-tie-rod-kit-for-01-10-silverado-sierra-1500hd-3500hd-01-13-gm-2500-suvs-03-09-hummer-h2","title":"Cognito Alloy Series Tie Rod Kit For 01-10 Silverado\/Sierra 2500\/3500 2WD\/4WD","description":"\u003cp\u003eThe Cognito Alloy Series Tie Rod kit is a Heavy-Duty stock replacement upgrade where the inner joint incorporates an oversized alloy ball and socket. Sold as a Pair. Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDue to the larger inner joint, longer sway bar end links may be necessary for stock or lifted vehicles to avoid contact with the sway bar while turning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlloy Series Tie Rod Kit For 01-10 Silverado\/Sierra 2500\/3500 2WD\/4WD\u003c\/li\u003e\n\u003cli\u003eHeavy duty stock replacement upgrade. significantly stronger than factory\u003c\/li\u003e\n\u003cli\u003eOffers more articulation than factory\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":46955121082605,"sku":"110-90283-GFGQ","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/cognito-motorsports-truck-cognito-alloy-series-tie-rod-kit-for-01-10-silverado-sierra-2500-3500-2wd-4wd-41443092267245.jpg?v=1726338594"},{"product_id":"cognito-pitman-idler-arm-support-kit-for-99-06-silverado-sierra-1500-torsion-bar-front-end-00-06-silverado-sierra-1500-suvs","title":"Cognito Pitman Idler Arm Support Kit For 99-06 Silverado\/Sierra 1500 2WD\/4WD","description":"\u003cp\u003ePitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades.\u003c\/p\u003e\n\u003cp\u003eThe Cognito PISK (Pitman and Idler Arm Support Kit) replaces the problem components that plague OE and aftermarket steering systems on several models and years of GM trucks and SUVs.\u003c\/p\u003e\n\u003cp\u003eThese improvements are accomplished through application of Cognito's innovative, patented design, by providing additional support to the vehicles pitman and idler arms, which eliminate the forward and rearward movement of the center-link.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003eOnly for use on stock height or lifted vehicles with the OE center-link in the stock location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSome of the key benefits of this kit are:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased steering component and tire life\u003c\/li\u003e\n\u003cli\u003eImproved handling and fuel mileage\u003c\/li\u003e\n\u003cli\u003eReduced lane wandering and driver fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":46955125801197,"sku":"110-90246-GFGQ","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/cognito-motorsports-truck-cognito-pitman-idler-arm-support-kit-for-99-06-silverado-sierra-1500-2wd-4wd-41443094954221.jpg?v=1726320766"},{"product_id":"cognito-extreme-duty-tie-rod-center-link-kit-for-11-22-silverado-sierra-2500-3500-2wd-4wd","title":"Cognito Extreme Duty Tie Rod Center Link Kit For 11-22 Silverado\/Sierra 2500\/3500 2WD\/4WD","description":"\u003cp\u003eNew Alloy Steel Extreme Duty Center Link And Tie Rods Direct Bolt In Complete Replacement For Stock Center Link And Tie Rod Assemblies.\u003c\/p\u003e\n\u003cp\u003eAlso Converts The Stock Style Inner Tie Rod Joint From A Ball And Socket Axial Loaded Joint To A Radial Loaded Joint Which Is Significantly Stronger And Offers More Articulation than OE. For use Only in OEM position. Not for use with lift kits that use a dropped center link. Made in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlloy Steel Extreme Duty Center Link\u003c\/li\u003e\n\u003cli\u003eConverts the stock style inner tie rod joint from a ball and socket axial loaded joint to a radial loaded joint.\u003c\/li\u003e\n\u003cli\u003eSignificantly stronger than factory\u003c\/li\u003e\n\u003cli\u003eOffers more articulation than factory\u003c\/li\u003e\n\u003cli\u003eDirect bolt in complete replacement for stock center link and tie rod assemblies\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Cognito Motorsports Truck","offers":[{"title":"Default Title","offer_id":46955154505965,"sku":"110-90940-GFGQ","price":729.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/cognito-motorsports-truck-cognito-extreme-duty-tie-rod-center-link-kit-for-11-22-silverado-sierra-2500-3500-2wd-4wd-41443118022893.jpg?v=1726337683"},{"product_id":"hd-drag-link-grand-cherokee-wj-jks-manufacturing","title":"HD Drag Link Grand Cherokee WJ JKS Manufacturing","description":"\u003cp\u003eThe factory drag link used on most late-model Jeeps is prone to bending due to its vulnerable position and light duty construction. Located directly forward of the front axle, it often makes contact with obstacles before anything else on the vehicle.\u003c\/p\u003e\n\u003cp\u003eWhen this occurs, the weak OE drag link typically yields to the opposing obstacle. In fact, the combination of large tires and rocky terrain can actually flex the pliable OE part beyond its working limits without contact ever occurring.\u003c\/p\u003e\n\u003cp\u003eThis heavy duty Drag Link attaches to the pitman arm and right steering knuckle. Constructed of .500 inch wall DOM 1.25 inch diameter steel tubing, length is 23.625 inch.\u003c\/p\u003e\n\u003cp\u003eThreads are M24 -1.5 Thread; Includes right-hand and left-hand jam nuts; Rod ends required; Powdercoated; Bolt-on; Each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty replacement resists impacts and bending much better than OE drag link.\u003c\/li\u003e\n\u003cli\u003eIncredibly strong 1.25 inch x 0.500 inch seamless tubing for excellent durability.\u003c\/li\u003e\n\u003cli\u003eProvides improved steering sensitivity and feedback to driver.\u003c\/li\u003e\n\u003cli\u003eProperly threaded to accept OE tie rod ends for convenient bolt-on installation - includes jam nuts.\u003c\/li\u003e\n\u003cli\u003eFeatures a machined flat recess for easy wrench adjustment.\u003c\/li\u003e\n\u003cli\u003eProtective black powdercoat finish resists corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535720595693,"sku":"JKSTR301-AAIA","price":143.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-hd-drag-link-grand-cherokee-wj-jks-manufacturing-42438047301869.jpg?v=1734783467"},{"product_id":"hd-tie-rod-grand-cherokee-wj-jks-manufacturing","title":"HD Tie Rod Grand Cherokee WJ JKS Manufacturing","description":"\u003cp\u003eUpgrade the steering on your Jeep Grand Cherokee WJ by installing the JKS HD Tie Rod. The factory tie rod used on most late-model Jeeps is prone to bending due to its vulnerable position and light duty construction.\u003c\/p\u003e\n\u003cp\u003eLocated directly forward of the front axle, it often makes contact with obstacles before anything else on the vehicle. When this occurs, the weak OE tie rod typically yields to the opposing obstacle before the driver even realizes contact was made. Your Jeep WJ Grand Cherokee's steering system can see extreme loads while off-roading. This heavy duty tie rod will enhance reliability.\u003c\/p\u003e\n\u003cp\u003eEven on-road, the increased unsprung mass of large wheels and tires further increases steering system loads.\u003c\/p\u003e\n\u003cp\u003eHeavy duty OE replacement. DOM Steel tube construction; 1.25 inch Diameter; 0.250 inch Wall; 40.75 inch Length; M24 -1.5 Thread; Includes right-hand and left-hand jam nuts; Rod ends required; Powdercoated; Bolt-on; Heavy duty threads accept OE tie rod ends for convenient bolt-on installation - includes jam nuts.\u003c\/p\u003e\n\u003cp\u003eTapered ends feature a machined flat recess for easy wrench adjustment. Protective black powdercoat finish resists corrosion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty replacement resists impacts and bending much better than OE tie rod.\u003c\/li\u003e\n\u003cli\u003eIncredibly strong 1.25 inch x 0.250 inch seamless tubing for excellent durability.\u003c\/li\u003e\n\u003cli\u003eProvides improved steering sensitivity and feedback to driver.\u003c\/li\u003e\n\u003cli\u003eProperly threaded to accept OE tie rod ends for convenient bolt-on installation - includes jam nuts.\u003c\/li\u003e\n\u003cli\u003eFeatures a machined flat recess for easy wrench adjustment.\u003c\/li\u003e\n\u003cli\u003eProtective black powdercoat finish resists corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535720693997,"sku":"JKSTR300-AAIA","price":217.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-hd-tie-rod-grand-cherokee-wj-jks-manufacturing-42438047596781.jpg?v=1734783278"},{"product_id":"wj-steering-conversion-drag-link-wrangler-tj-and-lj-cherokee-xj-and-comncahe-mj-jks-manufacturing","title":"WJ Steering Conversion Drag Link Wrangler TJ and LJ Cherokee XJ and Comncahe MJ JKS Manufacturing","description":"\u003cp\u003eUpgrade the steering system on your Jeep Wrangler TJ or LJ with a heavy duty WJ steering conversion Drag Link kit. This 20 inch end to end, this drag link connects the pitman arm and right steering knuckle.\u003c\/p\u003e\n\u003cp\u003eThe heavy duty DOM Steel tube construction measures 1.25 inch Diameter with 0.500 inch wall thickness with machined flats for effective jam nut tightening.\u003c\/p\u003e\n\u003cp\u003eRequires JKSOGS957 Jam Nuts (sold separately) and accepts WJ tie rod ends (not included). Powdercoated; Bolt-on installation. Sold each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty construction resists impacts and bending much better than OE drag link.\u003c\/li\u003e\n\u003cli\u003eEasy, bolt-on replacement for one of the most frequently damaged factory components.\u003c\/li\u003e\n\u003cli\u003eIncredibly strong 1.25 inch x 0.500 inch seamless tubing for excellent durability.\u003c\/li\u003e\n\u003cli\u003eProvides improved steering sensitivity and feedback to driver.\u003c\/li\u003e\n\u003cli\u003eProperly threaded to accept OE tie rod ends for convenient installation.\u003c\/li\u003e\n\u003cli\u003eProtective black powdercoat finish resists corrosion.\u003c\/li\u003e\n\u003cli\u003eEnd to end length of 20.00 inch.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535721578733,"sku":"JKSOGS956-AAIA","price":117.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-wj-steering-conversion-drag-link-wrangler-tj-and-lj-cherokee-xj-and-comncahe-mj-jks-manufacturing-42438048841965.jpg?v=1734791387"},{"product_id":"steering-conversion-tie-rod-jeep-wrangler-tj-and-lj-cherokee-xj-and-comanche-mj-jks-manufacturing","title":"Steering Conversion Tie Rod Jeep Wrangler TJ and LJ Cherokee XJ and Comanche MJ JKS Manufacturing","description":"\u003cp\u003eBuild a heavy duty WJ steering conversion on your Jeep Wrangler TJ, LJ, XJ or MJ with this WJ-style 38 inch Tie Rod. The heavy duty threaded tube attaches left and right steering knuckles and works in conjunction with a similar JKS JKSOGS955 20 inch Drag Link.\u003c\/p\u003e\n\u003cp\u003eThe heavy duty DOM steel tube construction measures 1.25 inch Diameter with 0.500 inch wall thickness with machined flats for effective jam nut tightening.\u003c\/p\u003e\n\u003cp\u003eRequires JKSOGS957 Jam Nuts (sold separately) and accepts WJ tie rod ends (not included). Powdercoated; Bolt-on installation. Sold each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty steering linkage for WJ knuckle conversions.\u003c\/li\u003e\n\u003cli\u003eAttaches right steering knuckle to left steering knuckle.\u003c\/li\u003e\n\u003cli\u003eDOM Steel tube construction.\u003c\/li\u003e\n\u003cli\u003e1.25 inch Diameter; 0.500 inch Wall.\u003c\/li\u003e\n\u003cli\u003eWJ tie rod ends and jam nuts required.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535721709805,"sku":"JKSOGS955-AAIA","price":191.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-steering-conversion-tie-rod-jeep-wrangler-tj-and-lj-cherokee-xj-and-comanche-mj-jks-manufacturing-42438049038573.jpg?v=1734789395"},{"product_id":"lower-steering-knuckle-gusset-weld-on-pair-wrangler-jk-jks-manufacturing","title":"Lower Steering Knuckle Gusset Weld On Pair Wrangler JK JKS Manufacturing","description":"\u003cp\u003eReinforces inner knuckle on axle housing; Attaches directly to front axle tube and inner steering knuckle on Jeep JK DANA 44 and DANA 30 axles. Adds much needed strength to help prevent the common bending of the inner C while off-road.\u003c\/p\u003e\n\u003cp\u003eThese gussets also stiffen up the area around the upper ball joint, preventing deflection from the stress of larger tires. The gussets attach to the front lower inch cornersinch where the inner knuckle meets the axle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMild steel 5\/8 inch thick; Bare metal; Weld-on; Sold in pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeld-on reinforcement gusset strengthens inner steering knuckle on front axle.\u003c\/li\u003e\n\u003cli\u003eProperly designed to connect inner steering knuckle to axle tube for greater joint integrity.\u003c\/li\u003e\n\u003cli\u003eProfiled shape is laser cut to ensure precise fitment on factory Dana 44 and Dana 30 front axles.\u003c\/li\u003e\n\u003cli\u003eExtends life of ball joints by preventing knuckles from flexing under stress.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 5\/8 inch mild steel allows superior weld penetration.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535722070253,"sku":"JKSOGS942-AAIA","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-lower-steering-knuckle-gusset-weld-on-pair-wrangler-jk-jks-manufacturing-42438049792237.jpg?v=1734783111"},{"product_id":"upper-steering-knuckle-gusset-wrangler-jk-jks-manufacturing","title":"Upper Steering Knuckle Gusset Wrangler JK JKS Manufacturing","description":"\u003cp\u003eReinforce the axle-to-inner steering knuckle position on Jeep JK DANA 44 and DANA 30 axles with this JKS heavy duty steel Upper Knuckle Gusset Kit. If you have ever experienced a crack or failure at the inner steering knuckle of your Dana 44 or 30 front axle, you will appreciate this weld-on steel gusset kit.\u003c\/p\u003e\n\u003cp\u003eThe gussets attach to the upper inch cornersinch where the inner knuckle meets the axle. Mild steel 5\/8 inch thick; Bare metal; Weld-on; Sold in pairs. Can use in conjunction with JKSOGS941 lower Gusset Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforces inner knuckle on axle housing.\u003c\/li\u003e\n\u003cli\u003eAttaches directly to front axle tube and inner steering knuckle.\u003c\/li\u003e\n\u003cli\u003eMild steel 5\/8 inch.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535722266861,"sku":"JKSOGS941-AAIA","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-upper-steering-knuckle-gusset-wrangler-jk-jks-manufacturing-42438050250989.jpg?v=1734791384"},{"product_id":"steering-sleeve-kit-ford-bronco-jks-manufacturing","title":"Steering Sleeve Kit Ford Bronco JKS Manufacturing","description":"\u003cp\u003eAs capable as these new Broncos are out on the trail, the factory steering tie rod ends have proven to be a weak point when running larger tires, failing at the threaded rod. JKS has the solution with a new sleeve kit designed specifically for the Bronco's factory tie rod ends.\u003c\/p\u003e\n\u003cp\u003eThis heavy-duty sleeve kit reinforces your steering by replacing the OE jam nut with a robust sleeve that supports the tie rod from bending or breaking. Designed to be used on a variety of lift heights, this sleeve kit still allows full toe adjustment to dial in front end alignment.\u003c\/p\u003e\n\u003cp\u003eInstallation is quick and easy to give you confidence and peace of mind to push your Bronco to the limit out on the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents tie rods from bending when subject to off-road situations.\u003c\/li\u003e\n\u003cli\u003eIncreases steering link diameter through the weakest section of the tie rod.\u003c\/li\u003e\n\u003cli\u003eWorks for all lift heights when used with the OE inner tie rod end.\u003c\/li\u003e\n\u003cli\u003eAllows full range of OE toe adjustment.\u003c\/li\u003e\n\u003cli\u003eMachined from cold-rolled 1215 steel, 1 inch OD.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535728656621,"sku":"JKS9700-AAIA","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-steering-sleeve-kit-ford-bronco-jks-manufacturing-42438062309613.jpg?v=1734789398"},{"product_id":"drag-link-flip-kit-2007-2018-jeep-wrangler-jk-jks-manufacturing","title":"Drag Link Flip Kit 2007-2018 Jeep Wrangler JK JKS Manufacturing","description":"\u003cp\u003eJKS Manufacturing's Drag Link Flip kit for JK Wranglers consists of a new drag link, a Track Bar bracket and a tapered steering arm insert. The design flattens out steering angles with lift heights of 3 inch and above, while providing correct geometry to increased droop travel.\u003c\/p\u003e\n\u003cp\u003eBringing angles back to stock with the increased ride height of a lift removes the bump steer commonly associated with lifted solid axle suspensions. Drilling is required with the supplied 7\/8 inch step bit.\u003c\/p\u003e\n\u003cp\u003e3 inch tall front aluminum bump stop extensions are necessary for proper clearance at full bump. JKS1130 extensions available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvide better performing, solid steering feel.\u003c\/li\u003e\n\u003cli\u003eFlattens out steering angle when combined with 2 inch lift or more.\u003c\/li\u003e\n\u003cli\u003e7\/8 inch Step Drill Bit Included\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"JKS Manufacturing","offers":[{"title":"Default Title","offer_id":47535743107309,"sku":"JKS1210-AAIA","price":238.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/jks-manufacturing-drag-link-flip-kit-2007-2018-jeep-wrangler-jk-jks-manufacturing-42438078660845.jpg?v=1734784006"},{"product_id":"currectlync-tie-rod-07-18-wrangler-jk-bolt-on-1-1-2-inch-diameter-tube-construction-forged-tie-rod-ends-includes-jam-nuts-and-adjusters-rockjock-4x4","title":"Currectlync Tie Rod 07-18 Wrangler JK Bolt-On 1 1\/2 Inch Diameter Tube Construction Forged Tie Rod Ends Includes Jam Nuts And Adjusters RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync tie rod for 2007-2018 Jeep JK Wranglers is 1 1\/2 Inch diameter alloy steel with larger forged, greasable tie rod ends and a double adjuster so that the tie rod can be adjusted on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThis unit will work on stock height or lifted vehicles and is compatible with ram assist steering. This tie rod is completely bolt-on and no modifications or machining to any part of the vehicle are necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Tie Rod\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003e1 1\/2 Inch Diameter Tube Construction\u003c\/li\u003e\n\u003cli\u003eForged Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003eIncludes Jam Nuts And Adjusters\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546534265069,"sku":"JK-9704TR-HWSH","price":423.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-tie-rod-07-18-wrangler-jk-bolt-on-1-1-2-inch-diameter-tube-construction-forged-tie-rod-ends-includes-jam-nuts-and-adjusters-rockjock-4x4-42468597629165.jpg?v=1735044463"},{"product_id":"currectlync-drag-link-07-18-wrangler-jk-flipped-1-1-2-inch-diameter-forged-construction-rockjock-4x4","title":"Currectlync Drag Link 07-18 Wrangler JK Flipped 1 1\/2 Inch Diameter Forged Construction RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync flipped drag link for 2007-2018 Jeep JK Wranglers is 1.3 Inch diameter solid forged steel bar with larger forged, greasable tie rod ends and a double adjuster so that the drag link can be adjusted on the vehicle.\u003c\/p\u003e\n\u003cp\u003eThis unit will work on stock height or lifted vehicles and is completely bolt-on, with the exception of drilling the passenger's side steering arm and installing the supplied tapered bushing to accomodate the drag link flip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Drag Link\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eFlipped\u003c\/li\u003e\n\u003cli\u003e1 1\/2 Inch Diameter Forged Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546534658285,"sku":"JK-9704RDL-HWSH","price":302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-drag-link-07-18-wrangler-jk-flipped-1-1-2-inch-diameter-forged-construction-rockjock-4x4-42468598677741.jpg?v=1735044995"},{"product_id":"currectlync-steering-system-07-18-wrangler-jk-w-flipped-drag-link-1-1-2-inch-diameter-tube-tie-rod-forged-drag-link-forged-tie-rod-ends-premium-jam-nuts-and-adjuster-rockjock-4x4","title":"Currectlync Steering System 07-18 Wrangler JK w\/Flipped Drag Link 1 1\/2 Inch Diameter Tube Tie Rod\/Forged Drag Link\/Forged Tie Rod Ends Premium Jam Nuts And Adjuster RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync steering system with flipped drag link for 2007-2018 Jeep JK Wranglers features an alloy steel 1 1\/2 Inch diameter tie rod, 1.3 Inch diameter solid forged steel drag link, larger forged, greasable tie rod ends and premium jam nuts and adjuster.\u003c\/p\u003e\n\u003cp\u003eThis kit is completely bolt-on, with the exception of drilling the passenger's side steering arm and installing the supplied tapered bushing to accomodate the drag link flip. Kit also includes a heavy duty steering stabilizer shock mounting kit.\u003c\/p\u003e\n\u003cp\u003eTie rod and drag link both feature a double adjusters so that none of the steering components have to be removed from the vehicle for adjustment. This unit will work on stock height or lifted vehicles and is compatible with ram assist steering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Steering System\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003ew\/Flipped Drag Link\u003c\/li\u003e\n\u003cli\u003e1 1\/2 Inch Diameter Tube Tie Rod\/Forged Drag Link\/Forged Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003ePremium Jam Nuts And Adjuster\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546535018733,"sku":"JK-9704P-HWSH","price":723.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-steering-system-07-18-wrangler-jk-w-flipped-drag-link-1-1-2-inch-diameter-tube-tie-rod-forged-drag-link-forged-tie-rod-ends-premium-jam-nuts-and-adjuster-rockjock-4x4-42468598808813.jpg?v=1735044458"},{"product_id":"currectlync-drag-link-end-07-18-wrangler-jk-flipped-configuration-installs-on-top-side-of-the-passengers-side-steering-arm-end-of-the-drag-link-includes-boot-nut-cotter-pin-zerk-fitting-rockjock-4x4","title":"Currectlync Drag Link End 07-18 Wrangler JK Flipped Configuration Installs On Top Side Of The Passengers Side Steering Arm End Of The Drag Link Includes Boot\/Nut\/Cotter Pin\/Zerk Fitting RockJock 4x4","description":"\u003cp\u003eRockJock's reversed configuration Currectlync drag link end for 2007-2018 Jeep JK Wranglers installs on the top side of the passenger's side steering arm and includes the boot, nut, cotter pin and zerk fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Drag Link End\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eFlipped Configuration\u003c\/li\u003e\n\u003cli\u003eInstalls On Top Side Of The Passengers Side Steering Arm End Of The Drag Link\u003c\/li\u003e\n\u003cli\u003eIncludes Boot\/Nut\/Cotter Pin\/Zerk Fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546535084269,"sku":"JK-9704DL-R-HWSH","price":193.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-drag-link-end-07-18-wrangler-jk-flipped-configuration-installs-on-top-side-of-the-passengers-side-steering-arm-end-of-the-drag-link-includes-boot-nut-cotter-pin-zerk-fitting-rockjock-4x4-42468598874349.jpg?v=1735045007"},{"product_id":"currectlync-drag-link-end-07-18-wrangler-jk-standard-configuration-installs-on-bottom-side-of-the-passengers-side-steering-arm-end-of-the-drag-link-includes-boot-nut-cotter-pin-zerk-fitting-rockjock-4x4","title":"Currectlync Drag Link End 07-18 Wrangler JK Standard Configuration Installs On Bottom Side Of The Passengers Side Steering Arm End Of The Drag Link Includes Boot\/Nut\/Cotter Pin\/Zerk Fitting RockJock 4x4","description":"\u003cp\u003eRockJock's standard configuration Currectlync drag link end for 2007-2018 Jeep JK Wranglers installs on the bottom side of the passenger's side steering arm and includes the boot, nut, cotter pin and zerk fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Drag Link End\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eStandard Configuration\u003c\/li\u003e\n\u003cli\u003eInstalls On Bottom Side Of The Passengers Side Steering Arm End Of The Drag Link\u003c\/li\u003e\n\u003cli\u003eIncludes Boot\/Nut\/Cotter Pin\/Zerk Fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546535903469,"sku":"JK-9704DL-2-HWSH","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-drag-link-end-07-18-wrangler-jk-standard-configuration-installs-on-bottom-side-of-the-passengers-side-steering-arm-end-of-the-drag-link-includes-boot-nut-cotter-pin-zerk-fitting-rockjock-4x4-42468599038189.jpg?v=1735045010"},{"product_id":"currectlync-steering-system-07-18-wrangler-jk-bolt-on-includes-1-1-2-inch-diameter-tie-rod-forged-drag-link-hd-steering-stabilizer-shock-mounting-kit-rockjock-4x4","title":"Currectlync Steering System 07-18 Wrangler JK Bolt-On Includes 1 1\/2 Inch Diameter Tie Rod\/Forged Drag Link HD Steering Stabilizer Shock Mounting Kit RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync steering system for 2007-2018 Jeep JK Wranglers features an alloy steel 1 1\/2 Inch diameter tie rod, 1.3 Inch diameter solid forged steel drag link, larger forged, greasable tie rod ends and premium jam nuts and adjuster.\u003c\/p\u003e\n\u003cp\u003eThis kit is completely bolt-on and includes a heavy duty steering stabilizer shock mounting kit. Tie rod and drag link both feature a double adjusters so that none of the steering components have to be removed from the vehicle for adjustment.\u003c\/p\u003e\n\u003cp\u003eThis unit will work on stock height or lifted vehicles and is compatible with ram assist steering. This system is completely bolt-on and no modifications or machining to any part of the vehicle are necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Steering System\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003eIncludes 1 1\/2 Inch Diameter Tie Rod\/Forged Drag Link\u003c\/li\u003e\n\u003cli\u003eHD Steering Stabilizer Shock Mounting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546536132845,"sku":"JK-9704-HWSH","price":711.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-steering-system-07-18-wrangler-jk-bolt-on-includes-1-1-2-inch-diameter-tie-rod-forged-drag-link-hd-steering-stabilizer-shock-mounting-kit-rockjock-4x4-42468599693549.jpg?v=1735044455"},{"product_id":"universal-ram-assist-steering-ram-mount-fits-1-5-8-inch-tube-rockjock-4x4","title":"Universal Ram Assist Steering Ram Mount Fits 1 5\/8 Inch Tube RockJock 4x4","description":"\u003cp\u003eRockJock's universal ram assist steering tie rod bracket provides you with a surface to weld your ram assist ram mounts to. For use on the JK-9703 steering system, or any other 1 5\/8 Inch diameter tie rod tube.\u003c\/p\u003e\n\u003cp\u003eBracket is constructed of laser cut heavy duty steel and includes grade 8 clamping hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal\u003c\/li\u003e\n\u003cli\u003eRam Assist Steering Mount\u003c\/li\u003e\n\u003cli\u003eFits 1 5\/8 Inch Tube\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546536722669,"sku":"JK-9703URM-HWSH","price":50.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-universal-ram-assist-steering-ram-mount-fits-1-5-8-inch-tube-rockjock-4x4-42468600152301.jpg?v=1735048249"},{"product_id":"currectlync-modular-extreme-duty-tie-rod-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-rockjock-4x4","title":"Currectlync Modular Extreme Duty Tie Rod 07-18 Wrangler JK Bolt-On 1 5\/8 Inch Diameter RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync modular extreme duty tie rod for 2007-2018 Jeep JK Wranglers features a 1 5\/8 Inch diameter 4130 chrome moly heat treated steel tie rod tube and 1 1\/4 Inch thread forged steel greasable tie rod ends.\u003c\/p\u003e\n\u003cp\u003eThe massive tie rod ends thread into the tie rod end body so that they may 1) be replaced without replacing the whole rod end saving cost, 2) the same threaded in tie rod end is used at all 4 points so only one spare would have to be carried, and 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod was desired.\u003c\/p\u003e\n\u003cp\u003eThe tie rod tube feature machined-in wrench flats and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle are necessary, and best of all, it's made in the U.S.A.!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Flipping the tie rod would require retapering the tie rod end holes from the top side of the knuckle. Rod end taper is 1.5 Inch per foot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Modular Extreme Duty Tie Rod\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003e1 5\/8 Inch Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546537083117,"sku":"JK-9703TR-HWSH","price":784.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-modular-extreme-duty-tie-rod-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-rockjock-4x4-42468600348909.jpg?v=1735044652"},{"product_id":"ram-assist-steering-ram-mount-07-18-wrangler-jk-fits-1-5-8-inch-tube-rockjock-4x4","title":"Ram Assist Steering Ram Mount 07-18 Wrangler JK Fits 1 5\/8 Inch Tube RockJock 4x4","description":"\u003cp\u003eRockJock's ram assist steering tie rod bracket allows you to easily mount your ram assist ram to the JK-9703 steering system, or any other 1 5\/8 Inch diameter tie rod tube.\u003c\/p\u003e\n\u003cp\u003eBracket is constructed of laser cut heavy duty steel and features laser cut steel tabs that are .750 Inch apart with 5\/8 Inch thru bolt holes. Grade 8 clamping hardware is included, silver zinc plate finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRam Assist Steering Mount\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eFits 1 5\/8 Inch Tube\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546537738477,"sku":"JK-9703RM-HWSH","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-ram-assist-steering-ram-mount-07-18-wrangler-jk-fits-1-5-8-inch-tube-rockjock-4x4-42468601135341.jpg?v=1735049330"},{"product_id":"currectlync-modular-extreme-duty-drag-link-right-hand-drive-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-rockjock-4x4","title":"Currectlync Modular Extreme Duty Drag Link Right Hand Drive 07-18 Wrangler JK Bolt-On 1 5\/8 Inch Diameter RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync modular extreme duty drag link for right hand drive 2007-2018 Jeep JK Wranglers features 1 5\/8 Inch diameter 4130 chrome moly heat treated steel drag link tube and 1 1\/4 Inch thread forged steel greasable tie rod ends.\u003c\/p\u003e\n\u003cp\u003eThe massive tie rod ends thread into the rod end body so that they may 1) be replaced without replacing the whole rod end saving cost, 2) the same threaded in rod end is used at all 4 points so only one spare would have to be carried, and 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod drag link was desired.\u003c\/p\u003e\n\u003cp\u003eDrag link tube features machined-in wrench flats and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle are necessary, and best of all, it's made in the U.S.A.!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Flipping the drag link would require retapering the rod end holes from the top side of the knuckle. Rod end taper is 1.5 Inch per foot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Modular Extreme Duty Drag Link\u003c\/li\u003e\n\u003cli\u003eRight Hand Drive 07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003e1 5\/8 Inch Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546537771245,"sku":"JK-9703PDL-HWSH","price":693.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-modular-extreme-duty-drag-link-right-hand-drive-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-rockjock-4x4-42468601200877.jpg?v=1735044643"},{"product_id":"currectlync-modular-extreme-duty-steering-system-right-hand-drive-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-tie-rod-drag-link-heavy-duty-steering-stabilizer-shock-mounting-kit-rockjock-4x4","title":"Currectlync Modular Extreme Duty Steering System Right Hand Drive 07-18 Wrangler JK Bolt-On 1 5\/8 Inch Diameter Tie Rod\/Drag Link Heavy Duty Steering Stabilizer Shock Mounting Kit RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync modular extreme duty steering system for right hand drive 2007-2018 Jeep JK Wranglers features 1 5\/8 Inch diameter 4130 chrome moly heat treated steel tubing tie rod and drag link tubes, 1 1\/4 Inch thread forged steel greasable tie rod ends, as well as new steering stabilizer shock bracket and u-bolt kit.\u003c\/p\u003e\n\u003cp\u003eThe massive tie rod ends thread into the tie rod end body so that they may 1) be replaced without replacing the whole rod end saving cost, 2) the same threaded in tie rod end is used at all 4 points so only one spare would have to be carried, and 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod and\/or drag link was desired.\u003c\/p\u003e\n\u003cp\u003eTie rod and drag link tubes feature wrench flats machined onto them and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle are necessary, and best of all, it's made in the U.S.A.!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e Flipping the tie rod or drag link would require retapering the tie rod end holes from the top side of the knuckle. Rod end taper is 1.5 Inch per foot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Modular Extreme Duty Steering System\u003c\/li\u003e\n\u003cli\u003eRight Hand Drive 07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003e1 5\/8 Inch Diameter Tie Rod\/Drag Link\u003c\/li\u003e\n\u003cli\u003eHeavy Duty Steering Stabilizer Shock Mounting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546537869549,"sku":"JK-9703P-HWSH","price":1411.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-modular-extreme-duty-steering-system-right-hand-drive-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-tie-rod-drag-link-heavy-duty-steering-stabilizer-shock-mounting-kit-rockjock-4x4-42468601266413.jpg?v=1735044650"},{"product_id":"currectlync-modular-extreme-duty-drag-link-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-rockjock-4x4","title":"Currectlync Modular Extreme Duty Drag Link 07-18 Wrangler JK Bolt-On 1 5\/8 Inch Diameter RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync modular extreme duty drag link for 2007-2018 Jeep JK Wranglers features a 1 5\/8 Inch diameter 4130 chrome moly heat treated steel drag link tube and 1 1\/4 Inch thread forged steel greasable tie rod ends.\u003c\/p\u003e\n\u003cp\u003eThe massive tie rod ends thread into the rod end body so that they may 1) be replaced without replacing the whole rod end saving cost, 2) the same threaded in rod end is used at all 4 points so only one spare would have to be carried, and 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod drag link was desired.\u003c\/p\u003e\n\u003cp\u003eDrag link tube features machined-in wrench flats and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle are necessary, and best of all, it's made in the U.S.A.!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e Flipping the drag link would require retapering the rod end holes from the top side of the knuckle. Rod end taper is 1.5 Inch per foot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Modular Extreme Duty Drag Link\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003e1 5\/8 Inch Diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546537935085,"sku":"JK-9703DL-HWSH","price":693.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-modular-extreme-duty-drag-link-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-rockjock-4x4-42468601331949.jpg?v=1735044641"},{"product_id":"currectlync-modular-extreme-duty-steering-system-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-tie-rod-drag-link-hd-steering-stabilizer-shock-mounting-kit-rockjock-4x4","title":"Currectlync Modular Extreme Duty Steering System 07-18 Wrangler JK Bolt-On 1 5\/8 Inch Diameter Tie Rod\/Drag Link HD Steering Stabilizer Shock Mounting Kit RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync modular extreme duty steering system for 2007-2018 Jeep JK Wranglers features 1 5\/8 Inch diameter 4130 chrome moly heat treated steel tubing tie rod and drag link tubes, 1 1\/4 Inch thread forged steel greasable tie rod ends, as well as new steering stabilizer shock bracket and u-bolt kit.\u003c\/p\u003e\n\u003cp\u003eThe massive tie rod ends thread into the tie rod end body so that they may 1) be replaced without replacing the whole rod end saving cost, 2) the same threaded in tie rod end is used at all 4 points so only one spare would have to be carried, and 3) they may be unscrewed from the rod end bodies and screwed in from the other side if a flipped tie rod and\/or drag link was desired.\u003c\/p\u003e\n\u003cp\u003eTie rod and drag link tubes feature wrench flats machined onto them and jam nuts for ease of adjustment. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle are necessary, and best of all, it's made in the U.S.A.!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Flipping the tie rod or drag link would require retapering the tie rod end holes from the top side of the knuckle. Rod end taper is 1.5 Inch per foot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Modular Extreme Duty Steering System\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003e1 5\/8 Inch Diameter Tie Rod\/Drag Link\u003c\/li\u003e\n\u003cli\u003eHD Steering Stabilizer Shock Mounting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546538066157,"sku":"JK-9703-HWSH","price":1411.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-modular-extreme-duty-steering-system-07-18-wrangler-jk-bolt-on-1-5-8-inch-diameter-tie-rod-drag-link-hd-steering-stabilizer-shock-mounting-kit-rockjock-4x4-42468601463021.jpg?v=1735044647"},{"product_id":"dropped-pitman-arm-07-18-wrangler-jk-for-use-w-rockjock-suspension-kit-rockjock-4x4","title":"Dropped Pitman Arm 07-18 Wrangler JK For Use w\/ RockJock Suspension Kit RockJock 4x4","description":"\u003cp\u003eRockJock's dropped pitman arm for 2007-2018 Jeep JK Wranglers is included in all of our suspension kits, but can be purchased separately for use on any JK!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDropped Pitman Arm\u003c\/li\u003e\n\u003cli\u003e07-18 Wrangler JK\u003c\/li\u003e\n\u003cli\u003eFor Use w\/ RockJock Suspension Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546548748525,"sku":"CE-9807PA-HWSH","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-dropped-pitman-arm-07-18-wrangler-jk-for-use-w-rockjock-suspension-kit-rockjock-4x4-42468615487725.jpg?v=1735056515"},{"product_id":"currectlync-tie-rod-end-97-06-wrangler-tj-and-lj-unlimited-xj-mj-right-hand-thread-zerk-on-cap-for-use-w-ce-9701-kit-each-rockjock-4x4","title":"Currectlync Tie Rod End 97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Right Hand Thread Zerk On Cap For Use w\/ CE-9701 Kit Each RockJock 4x4","description":"\u003cp\u003eRight hand thread tie rod end for RockJock's Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch Right Hand threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life.\u003c\/p\u003e\n\u003cp\u003eIncludes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync steering-this is the tie rod end with the zerk fitting on the back of the cap that goes on the driver's side of the vehicle!\u003c\/p\u003e\n\u003cp\u003eFor use as a replacement part for the RockJock Currectlync system only and may Not be used in conjunction with any stock steering components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Tie Rod End\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ\u003c\/li\u003e\n\u003cli\u003eRight Hand Thread\u003c\/li\u003e\n\u003cli\u003eZerk On Cap\u003c\/li\u003e\n\u003cli\u003eFor Use w\/ CE-9701 Kit\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546549960941,"sku":"CE-9701TRR-HWSH","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-tie-rod-end-97-06-wrangler-tj-and-lj-unlimited-xj-mj-right-hand-thread-zerk-on-cap-for-use-w-ce-9701-kit-each-rockjock-4x4-42468617912557.jpg?v=1735044466"},{"product_id":"currectlync-tie-rod-tube-97-06-wrangler-tj-and-lj-unlimited-xj-mj-tube-only-for-use-w-ce-9701-kit-each-rockjock-4x4","title":"Currectlync Tie Rod Tube 97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Tube Only For Use w\/ CE-9701 Kit Each RockJock 4x4","description":"\u003cp\u003e1 1\/4 Inch diameter solid alloy steel tie rod bar only for the RockJock Currectlync heavy duty steering system. Designed to use RockJock's 22mm x 1.5 pitch thread tie rod ends.\u003c\/p\u003e\n\u003cp\u003eThis unit is rated at 200 percent stronger than than the stock part. For use as a replacement part for the RockJock Currectlync system only and may Not be used in conjunction with any stock steering components.\u003c\/p\u003e\n\u003cp\u003eFor use as a replacement part for the RockJock Currectlync system only and may Not be used in conjunction with any stock steering components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Details: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Tie Rod Tube\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ\u003c\/li\u003e\n\u003cli\u003eTube Only\u003c\/li\u003e\n\u003cli\u003eFor Use w\/ CE-9701 Kit\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546550026477,"sku":"CE-9701TRN-HWSH","price":191.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-tie-rod-tube-97-06-wrangler-tj-and-lj-unlimited-xj-mj-tube-only-for-use-w-ce-9701-kit-each-rockjock-4x4-42468617978093.jpg?v=1735044275"},{"product_id":"currectlync-drag-link-end-97-06-wrangler-tj-and-lj-unlimited-xj-mj-long-left-hand-thread-pitman-arm-end-of-drag-link-for-use-w-ce-9701-kit-each-rockjock-4x4","title":"Currectlync Drag Link End 97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Long, Left Hand Thread Pitman Arm End Of Drag Link For Use w\/ CE-9701 Kit Each RockJock 4x4","description":"\u003cp\u003eLeft hand thread drag link end for RockJock's Currectlync heavy duty steering kit for for Jeep TJ, LJ, XJ, MJ and ZJ vehicles is designed with 1 1\/8 Inch thread for maximum strength.\u003c\/p\u003e\n\u003cp\u003eGrease fitting provides for increased performance and long life. Includes boot, castle nut, and cotter pin.\u003c\/p\u003e\n\u003cp\u003eThis end fits at the pitman arm of the Currectlync drag link only and may Not be used in conjunction with any stock steering components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Drag Link End\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ\u003c\/li\u003e\n\u003cli\u003eLong, Left Hand Thread\u003c\/li\u003e\n\u003cli\u003ePitman Arm End Of Drag Link\u003c\/li\u003e\n\u003cli\u003eFor Use w\/ CE-9701 Kit\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546550419693,"sku":"CE-9701DLR-HWSH","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-drag-link-end-97-06-wrangler-tj-and-lj-unlimited-xj-mj-long-left-hand-thread-pitman-arm-end-of-drag-link-for-use-w-ce-9701-kit-each-rockjock-4x4-42468619092205.jpg?v=1735045013"},{"product_id":"currectlync-drag-link-97-06-wrangler-tj-and-lj-unlimited-xj-mj-drag-link-rod-only-w-one-end-only-for-use-w-ce-9701-kit-each-rockjock-4x4","title":"Currectlync Drag Link 97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Drag Link Rod Only w\/ One End Only For Use w\/ CE-9701 Kit Each RockJock 4x4","description":"\u003cp\u003e1 1\/4 Inch forged alloy steel drag link only out of the RockJock Currectlync heavy duty tie rod kit for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features oversized 1 1\/8 Inch threads on the adjustment end and ball joint style tie rod end incorporated into the the knuckle end.\u003c\/p\u003e\n\u003cp\u003eThis unit will only work as a replacement part for the RockJock system-it may Not be used as in conjunction with any stock steering components. This unit is rated at 200 percent stronger than than the stock original equipment drag link.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Drag Link\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Drag Link Rod Only w\/ One End Only\u003c\/li\u003e\n\u003cli\u003eFor Use w\/ CE-9701 Kit\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546550517997,"sku":"CE-9701DLO-HWSH","price":193.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-drag-link-97-06-wrangler-tj-and-lj-unlimited-xj-mj-drag-link-rod-only-w-one-end-only-for-use-w-ce-9701-kit-each-rockjock-4x4-42468619223277.jpg?v=1735045001"},{"product_id":"currectlync-drag-link-97-06-wrangler-tj-and-lj-unlimited-xj-mj-complete-drag-link-for-use-w-ce-9701-kit-each-rockjock-4x4","title":"Currectlync Drag Link 97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Complete Drag Link For Use w\/ CE-9701 Kit Each RockJock 4x4","description":"\u003cp\u003e1 1\/4 Inch forged alloy steel drag link only out of RockJock's Currectlync heavy duty tie rod kit for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features an oversized 1 1\/8 Inch threaded adjuster, giant clamps, and threaded ball joint end at the pitman arm end, and it provides up to 200 percent more strength than the original equipment drag link.\u003c\/p\u003e\n\u003cp\u003eThis unit will only work as a replacement part for the RockJock system-it may Not be used as in conjunction with any stock tie rod parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Drag Link\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ\u003c\/li\u003e\n\u003cli\u003eComplete Drag Link\u003c\/li\u003e\n\u003cli\u003eFor Use w\/ CE-9701 Kit\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546550812909,"sku":"CE-9701DL-HWSH","price":406.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-drag-link-97-06-wrangler-tj-and-lj-unlimited-xj-mj-complete-drag-link-for-use-w-ce-9701-kit-each-rockjock-4x4-42468619944173.jpg?v=1735044998"},{"product_id":"currectlync-steering-system-97-06-wrangler-tj-and-lj-unlimited-xj-mj-bolt-on-includes-1-1-4-inch-diameter-tie-rod-forged-drag-link-hd-steering-stabilizer-shock-mounting-kit-rockjock-4x4","title":"Currectlync Steering System 97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ Bolt-On Includes 1 1\/4 Inch Diameter Tie Rod\/Forged Drag Link HD Steering Stabilizer Shock Mounting Kit RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 ј Inch diameter forged alloy drag link, and 1 ј Inch solid alloy steel tie rod bar that is bored and threaded on the ends.\u003c\/p\u003e\n\u003cp\u003eAll 7\/8 Inch thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts.\u003c\/p\u003e\n\u003cp\u003eNo modifications or machining to any part of the vehicle is necessary. This unit is rated at 200 percent stronger than the stock components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This unit is designed to be used on vehicles with 4 Inch of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 Inch bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync Steering System\u003c\/li\u003e\n\u003cli\u003e97-06 Wrangler TJ and LJ Unlimited\/XJ\/MJ\u003c\/li\u003e\n\u003cli\u003eBolt-On\u003c\/li\u003e\n\u003cli\u003eIncludes 1 1\/4 Inch Diameter Tie Rod\/Forged Drag Link\u003c\/li\u003e\n\u003cli\u003eHD Steering Stabilizer Shock Mounting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546550878445,"sku":"CE-9701-HWSH","price":712.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-steering-system-97-06-wrangler-tj-and-lj-unlimited-xj-mj-bolt-on-includes-1-1-4-inch-diameter-tie-rod-forged-drag-link-hd-steering-stabilizer-shock-mounting-kit-rockjock-4x4-42468620009709.jpg?v=1735044460"},{"product_id":"currectlync-jl-jt-heavy-duty-drag-link-rockjock-4x4","title":"Currectlync JL\/JT Heavy Duty Drag Link RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync Drag Link for 2018 and up Jeep JL Wranglers and 2020 and up Jeep JT Gladiators is must-have for those who actually get their Jeeps out in the dirt! Don't get stranded in the wilderness with bent or broken steering components!\u003c\/p\u003e\n\u003cp\u003eRockJock's completely bolt-on drag link features 1.3 inch diameter solid forged steel construction, larger forged, greasable tie rod ends and premium jam nuts and adjuster.\u003c\/p\u003e\n\u003cp\u003eThe double adjusting feature allows for drag link spec. adjustments after installation without having to remove either end of the drag link from the vehicle.\u003c\/p\u003e\n\u003cp\u003eThis easy to install component is designed for use on stock height or lifted vehicles, with or without ram assist, and requires no modifications or machining to any part of the vehicle!\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync JL\/JT Heavy Duty Drag Link\u003c\/li\u003e\n\u003cli\u003eBolt-on drag link\u003c\/li\u003e\n\u003cli\u003e1.3 inch diameter solid forged steel construction\u003c\/li\u003e\n\u003cli\u003eLarger forged\u003c\/li\u003e\n\u003cli\u003eGreasable tie rod ends\u003c\/li\u003e\n\u003cli\u003ePremium jam nuts and adjuster\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546605994221,"sku":"RJ-442102-101-HWSH","price":292.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-heavy-duty-drag-link-rockjock-4x4-42468692852973.jpg?v=1735044821"},{"product_id":"currectlync-jl-jt-heavy-duty-tie-rod-rockjock-4x4","title":"Currectlync JL\/JT Heavy Duty Tie Rod RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync Tie Rod for 2018 and up Jeep JL Wranglers and 2020 and up Jeep JT Gladiators is must-have for those who actually get their Jeeps out in the dirt! Don't get stranded in the wilderness with bent or broken steering components!\u003c\/p\u003e\n\u003cp\u003eRockJock's completely bolt-on tie rod features 1 5\/8 inch diameter alloy steel construction, larger forged, greasable tie rod ends and premium jam nuts and adjuster.\u003c\/p\u003e\n\u003cp\u003eBeing that this heavy duty tie rod eliminates the factory steering stabilizer shock mounting location, RockJock offers various steering stabilizer shock relocation and high-mount kits for the shock, or, for those with larger tires, an easy-to-install ram assist mount is available!\u003c\/p\u003e\n\u003cp\u003eThe double adjuster feature allows for tie rod spec adjustments after installation without having to remove either end of the tie rod from the vehicle. This easy to install component is designed for use on stock height or lifted vehicles, requires no modifications or machining to any part of the vehicle.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync JL\/JT Heavy Duty Tie Rod\u003c\/li\u003e\n\u003cli\u003eBolt-on tie rod\u003c\/li\u003e\n\u003cli\u003e1 5\/8 inch diameter alloy steel construction\u003c\/li\u003e\n\u003cli\u003eLarger forged\u003c\/li\u003e\n\u003cli\u003eGreasable tie rod ends\u003c\/li\u003e\n\u003cli\u003ePremium jam nuts and adjuster\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546606158061,"sku":"RJ-442101-101-HWSH","price":431.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-heavy-duty-tie-rod-rockjock-4x4-42468693115117.jpg?v=1735044827"},{"product_id":"currectlync-jl-jt-heavy-duty-steering-system-rockjock-4x4","title":"Currectlync JL\/JT Heavy Duty Steering System RockJock 4x4","description":"\u003cp\u003eRockJock's Currectlync Steering System for 2018 and up Jeep JL Wranglers and 2020 and up Jeep JT Gladiators is must-have for those who actually get their Jeeps out in the dirt! Don't get stranded in the wilderness with bent or broken steering components!\u003c\/p\u003e\n\u003cp\u003eRockJock's completely bolt-on Currectlync Steering System features an alloy steel 1 5\/8 inch diameter tie rod, 1.3 inch diameter solid forged steel drag link, larger forged, greasable tie rod ends and premium jam nuts and adjusters.\u003c\/p\u003e\n\u003cp\u003eKit includes RockJock's JL\/JT High-Mount Steering Stabilizer Relocation Bracket Kit for the passenger's side of the stabilizer shock which moves the shock from the tie rod to the axle housing, as well as way up out of harm's way.\u003c\/p\u003e\n\u003cp\u003eA heavy duty stabilizer shock mounting kit for the opposite end of the shock is also included that moves that shock mounting location from the axle housing to the tie rod tube. Both the tie rod and drag link feature double adjusters so that they do not require removal from the vehicle for adjustment once installed.\u003c\/p\u003e\n\u003cp\u003eThis unit is designed for use on stock height or lifted vehicles, but for those with big tires, these components are also compatible with ram assist steering (see part number JK-9703RM for an easy to install ram mount).\u003c\/p\u003e\n\u003cp\u003eThis easy to install kit requires no modifications or machining to any part of the vehicle and an instruction manual and video are both available to assist!\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrectlync JL\/JT Heavy Duty Steering System\u003c\/li\u003e\n\u003cli\u003eAlloy steel 1 5\/8inch diameter tie rod\u003c\/li\u003e\n\u003cli\u003e1.3 inch diameter solid forged steel drag link\u003c\/li\u003e\n\u003cli\u003eLarger forged\u003c\/li\u003e\n\u003cli\u003eGreasable tie rod ends\u003c\/li\u003e\n\u003cli\u003ePremium jam nuts and adjusters\u003c\/li\u003e\n\u003cli\u003eSold As: Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546606289133,"sku":"RJ-442100-101-HWSH","price":788.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-heavy-duty-steering-system-rockjock-4x4-42468693377261.jpg?v=1735044824"},{"product_id":"currectlync-jl-jt-drag-link-end-at-knuckle-organically-shaped-forged-lh-thread-forged-steel","title":"Currectlync JL\/JT Drag Link End At Knuckle Organically Shaped Forged LH Thread Forged Steel","description":"\u003cp\u003eThe RockJock Currectlync Drag Link End for our Jeep JL\/JT teering system is an organically shaped chromoly forging with a deep dip in the middle of the bar that allows for maximum up travel, while still retaining maximum strength and rigidity.\u003c\/p\u003e\n\u003cp\u003eFeatures include the tapered pin that fits into the JL\/JT's factory passenger's side steering knuckle and 1 1\/8 in.-18 LH threads that thread into our JK-9704DL-3 drag link adjuster sleeve.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546611204333,"sku":"RJ-STRG-0202-T-HWSH","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-drag-link-end-at-knuckle-organically-shaped-forged-lh-thread-forged-steel-42468702814445.jpg?v=1735056341"},{"product_id":"currectlync-jk-drag-link-end-at-knuckle-organically-shaped-forged-lh-thread-forged-steel","title":"Currectlync JK Drag Link End At Knuckle Organically Shaped Forged LH Thread Forged Steel","description":"\u003cp\u003eThe RockJock Currectlync Drag Link End for our Jeep JK steering system is an organically shaped chromoly forging with a deep dip in the middle of the bar that allows for maximum up travel, while still retaining maximum strength and rigidity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features include\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTapered pin that fits into the JL\/JT's factory passenger's side steering knuckle\u003c\/li\u003e\n\u003cli\u003e1 1\/8 in.-18 LH threads that thread into our JK-9704DL-3 drag link adjuster sleeve.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546611695853,"sku":"JK-9704DL-2T-HWSH","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jk-drag-link-end-at-knuckle-organically-shaped-forged-lh-thread-forged-steel-42468703699181.jpg?v=1735045192"},{"product_id":"currectlync-jl-jt-passengers-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4","title":"Currectlync JL\/JT Passenger's Side Tie Rod End (RH Thread Forged Steel) RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync tie rod end for their JL Wrangler, JL Unlimited and JT Gladiator steering system installs at the passenger's side end of the tie rod and includes the boot, nut, cotter pin and zerk fitting. Threads are 1 1\/8 inch-18, right hand.\u003c\/p\u003e\n\u003cp\u003eForged steel, finished in gloss black. This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546614055149,"sku":"RJ-STRG-0212-HWSH","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-passenger-s-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4-42468709171437.jpg?v=1735044829"},{"product_id":"currectlync-jl-jt-drivers-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4","title":"Currectlync JL\/JT Driver's Side Tie Rod End (RH Thread Forged Steel) RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync tie rod end for their JL Wrangler, JL Unlimited and JT Gladiator steering system installs at the driver's side end of the tie rod and includes the boot, nut, cotter pin and zerk fitting. Threads are 1 1\/8 inch-18, right hand.\u003c\/p\u003e\n\u003cp\u003eForged steel, finished in gloss black. This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546614186221,"sku":"RJ-STRG-0211-HWSH","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-driver-s-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4-42468709433581.jpg?v=1735044820"},{"product_id":"currectlync-jk-passengers-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4","title":"Currectlync JK Passenger's Side Tie Rod End RH Thread Forged Steel RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync tie rod end for JK Wrangler and JK Wrangler Unlimited vehicles installs at the passenger's side end of the tie rod and includes the boot, nut, cotter pin and zerk fitting. This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546614317293,"sku":"JK-9704TR-2-HWSH","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jk-passenger-s-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4-42468709695725.jpg?v=1735056335"},{"product_id":"currectlync-jk-drivers-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4","title":"Currectlync JK Driver's Side Tie Rod End RH Thread Forged Steel RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync tie rod end for JK Wrangler and JK Wrangler Unlimited vehicles installs at the driver's side end of the tie rod and includes the boot, nut, cotter pin and zerk fitting. This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546614481133,"sku":"JK-9704TR-1-HWSH","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jk-driver-s-side-tie-rod-end-rh-thread-forged-steel-rockjock-4x4-42468709957869.jpg?v=1735056174"},{"product_id":"currectlync-jl-jt-tie-rod-tube-42mm-1-5-8-inch-chromoly-rockjock-4x4","title":"Currectlync JL\/JT Tie Rod Tube (42mm\/1 5\/8 Inch Chromoly) RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync tie rod tube for their JL Wrangler, JL Unlimited and JT Gladiator steering system features 1 1\/8 inch-18 RH threads at the passenger's side and and 1 3\/8 inch-18 LH threads at the driver's side end.\u003c\/p\u003e\n\u003cp\u003eFinished in semi-gloss black. This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546615136493,"sku":"RJ-STRG-1801-HWSH","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-tie-rod-tube-42mm-1-5-8-inch-chromoly-rockjock-4x4-42468711760109.jpg?v=1735044638"},{"product_id":"currectlync-jk-tie-rod-tube-only-chromoly-1-65-inch-diameter-rockjock-4x4","title":"Currectlync JK Tie Rod Tube Only (Chromoly 1.65 Inch Diameter) RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync tie rod tube for their JK Wrangler and Unlimited steering system features 1 1\/8 inch-18 RH threads at the passenger's side and and 1 3\/8 inch-18 LH threads at the driver's side end. Finished in semi-gloss black. This unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546615267565,"sku":"JK-9704TR-3-HWSH","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jk-tie-rod-tube-only-chromoly-1-65-inch-diameter-rockjock-4x4-42468711891181.jpg?v=1735056338"},{"product_id":"currectlync-steering-system-jk-axle-in-a-tj-lj-xj-mj-zj-rockjock-4x4","title":"Currectlync Steering System - JK Axle in a TJ\/LJ\/XJ\/MJ\/ZJ RockJock 4X4","description":"\u003cp\u003eRockJock's completely bolt-on Currectlync Steering System eases some of the pain of installing a JK front axle in your TJ, LJ, XJ, MJ or ZJ! The axle swap can be tricky, but it's doable. But, what do you do for steering? Here is your solution!\u003c\/p\u003e\n\u003cp\u003eFeatures include an alloy steel 42mm, 1.65 inch) diameter tie rod, 1.3 inch diameter solid forged steel drag link, larger forged, greasable tie rod ends, premium jam nuts and adjuster and it's painted black, so it's ready for install right out of the box!\u003c\/p\u003e\n\u003cp\u003eAdditionally, you'll need a modified pitman arm to hook this all up. This kit includes a brand new TJ style pitman arm with the proper taper for the new steering system. Both the tie rod and drag link feature double adjusters so that they do not require removal from the vehicle for adjustment once installed.\u003c\/p\u003e\n\u003cp\u003eThis unit is designed for use on stock height or lifted vehicles, but for those with big tires, these components are also compatible with ram assist steering. Components are completely bolt-on and kit includes our U-bolt style steering stabilizer shock mounting bracket to allow you to remount a steering stabilizer shock to the new tie rod tube.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546616021229,"sku":"RJ-420000-101-HWSH","price":915.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-steering-system-jk-axle-in-a-tj-lj-xj-mj-zj-rockjock-4x4-42468713038061.jpg?v=1735056353"},{"product_id":"currectlync-steering-pitman-arm-tj-pitman-arm-with-jk-taper-rockjock-4x4","title":"Currectlync Steering Pitman Arm (TJ Pitman Arm with JK Taper) RockJock 4X4","description":"\u003cp\u003eRockJock provides this retapered pitman arm for use when doing a JK axle swap into a TJ\/LJ\/XJ\/MJ\/ZJ. Doing this swap requires a lot of detail parts to make it all come together! Among other necessary component needs, is a way to attach the the steering!\u003c\/p\u003e\n\u003cp\u003eThis pitman arm bolts to a TJ\/LJ\/LJ\/XJ\/MJ\/ZJ steering box, but features the tapered hole specs. of a JK, so that a JK taper tie rod end will bolt-in properly. Finshed in gloss black.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546619035885,"sku":"RJ-436100-1-HWSH","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-steering-pitman-arm-tj-pitman-arm-with-jk-taper-rockjock-4x4-42468717527277.jpg?v=1735056350"},{"product_id":"currectlync-jl-jt-drag-link-end-at-pitman-arm-rh-thread-forged-steel-rockjock-4x4","title":"Currectlync JL\/JT Drag Link End at Pitman Arm (RH Thread Forged Steel) RockJock 4X4","description":"\u003cp\u003eRockJock's Currectlync Drag Link End for their JL Wrangler, JL Unlimited and JT Gladiator steering system features a tapered pin that fits into the vehicle's pitman arm and 1 1\/8 Inch-18 RH threads that thread into our JK-9704DL-3 Drag Link Adjuster Sleeve.\u003c\/p\u003e\n\u003cp\u003eThis unit will only work as a replacement part for the RockJock Currectlync system - it may not be used in conjunction with any stock steering components.\u003c\/p\u003e\n","brand":"RockJock 4x4","offers":[{"title":"Default Title","offer_id":47546632863981,"sku":"RJ-STRG-0201-HWSH","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/rockjock-4x4-currectlync-jl-jt-drag-link-end-at-pitman-arm-rh-thread-forged-steel-rockjock-4x4-42468735025389.jpg?v=1735044815"},{"product_id":"apex-chassis-heavy-duty-1-ton-tie-rod-drag-link-assembly-in-polished-aluminum-fits-07-18-jeep-wrangler-jk-jku-rubicon-sahara-sport-note-this-no-flip-kit-fits-vehicles-with-a-lift-of-3-5-inches-or-less","title":"Apex Chassis Heavy Duty 1 Ton Tie Rod \u0026 Drag Link Assembly in Polished Aluminum Fits: 07-18 Jeep Wrangler JK JKU Rubicon Sahara Sport.  Note this NO-FLIP kit fits vehicles with a lift of 3.5 inches or less","description":"\u003cp\u003eThis is a complete 1 Ton upgraded replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (polished\u003cspan data-mce-fragment=\"Inch1\" inch=\"\"\u003e aluminum\u003c\/span\u003e) which is also the adjusting sleeve, and left and right forged steel tie rod ends, the drag link (polished aluminum) which is also the adjusting sleeve, and left and right forged steel drag link ends. Plus 4 Ninja Lock Washers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eAll Flip Kits include the taper sleeve!!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eIt does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong\u003eWheels and Spacers:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf you run AEV or stock Rubicon wheels, you'll need a 1.5 Inch spacer. This kits works with a 17 Inch wheel with a 4.75 Inch backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong data-mce-fragment=\"Inch1\" inch=\"\"\u003eDifferentials and Mods: \u003c\/strong\u003eThis steering system fits stock Dana 30\/44 axles No Flip. If you have done any major modifications give us a ring to discuss. This will fit most modifications, but we want to make sure before shipping.  You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eIf your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well.\u003c\/p\u003e\n","brand":"Apex Chassis","offers":[{"title":"Default Title","offer_id":47549932175597,"sku":"KIT155-NoFlip-JJSP","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/apex-chassis-apex-chassis-heavy-duty-1-ton-tie-rod-drag-link-assembly-in-polished-aluminum-fits-07-18-jeep-wrangler-jk-jku-rubicon-sahara-sport-note-this-no-flip-kit-fits-vehicles-with-a-lift-of-3-5-inches-or-less-42474245161197.jpg?v=1735129419"},{"product_id":"apex-chassis-heavy-duty-1-ton-tie-rod-drag-link-assembly-in-black-aluminum-fits-07-18-jeep-wrangler-jk-jku-rubicon-sahara-sport-note-this-no-flip-kit-fits-vehicles-with-a-lift-of-3-5-inches-or-less","title":"Apex Chassis Heavy Duty 1 Ton Tie Rod \u0026 Drag Link Assembly in Black Aluminum Fits: 07-18 Jeep Wrangler JK JKU Rubicon Sahara Sport. Note this NO-FLIP kit fits vehicles with a lift of 3.5 inches or less","description":"\u003cp\u003eThis is a complete Inch1 Ton Inch upgraded replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (\u003cspan data-mce-fragment=\"Inch1\" inch=\"\"\u003eblack anodized aluminum\u003c\/span\u003e) which is also the adjusting sleeve, and left and right forged steel tie rod ends, the drag link (black anodized aluminum) which is also the adjusting sleeve, and left and right forged steel drag link ends. Plus 4 Ninja Lock Washers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eAll Flip Kits include the taper sleeve!!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eIt does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong\u003eWheels and Spacers:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf you run AEV or stock Rubicon wheels, you'll need a 1.5 Inch spacer. This kits works with a 17 Inch wheel with a 4.75 Inch backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong data-mce-fragment=\"Inch1\" inch=\"\"\u003eDifferentials and Mods: \u003c\/strong\u003eThis steering system fits stock Dana 30\/44 axles No Flip. If you have done any major modifications give us a ring  to discuss. This will fit most modifications, but we want to make sure before shipping. You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eIf your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well.\u003c\/p\u003e\n","brand":"Apex Chassis","offers":[{"title":"Default Title","offer_id":47549932306669,"sku":"KIT150-NoFlip-JJSP","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/apex-chassis-apex-chassis-heavy-duty-1-ton-tie-rod-drag-link-assembly-in-black-aluminum-fits-07-18-jeep-wrangler-jk-jku-rubicon-sahara-sport-note-this-no-flip-kit-fits-vehicles-with-a-lift-of-3-5-inches-or-less-42474246308077.jpg?v=1735129415"},{"product_id":"apex-chassis-heavy-duty-1-ton-tie-rod-drag-link-assembly-in-steel-fits-07-18-jeep-wrangler-jk-jku-rubicon-sahara-sport-note-this-no-flip-kit-fits-vehicles-with-a-lift-of-3-5-inches-or-less","title":"Apex Chassis Heavy Duty 1 Ton Tie Rod \u0026 Drag Link Assembly in Steel Fits: 07-18 Jeep Wrangler JK JKU Rubicon Sahara Sport. Note this NO-FLIP kit fits vehicles with a lift of 3.5 inches or less","description":"\u003cp\u003eThis is a complete 1 Ton upgraded replacement steering kit for your 2007-2018 Jeep Wrangler JK. It includes the tie rod (DOM Steel) which is also the adjusting sleeve, and left and right forged steel tie rod ends, the drag link (DOM Steel ) which is also the adjusting sleeve, and left and right forged steel drag link ends. Plus 4 Ninja Lock Washers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eAll Flip Kits include the taper sleeve!!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eIt does not include the steering stabilizer bracket which you will need to choose in the options above based on the steering stabilizer you use.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong\u003eWheels and Spacers:\u003c\/strong\u003e If you run AEV or stock Rubicon wheels, you'll need a 1.5 Inch spacer. This kits works with a 17 Inch wheel with a 4.75 Inch backspacing or less. We recommend the steering stabilizer be fitted in the stock location, or a relocation kit may be required. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003e\u003cstrong data-mce-fragment=\"Inch1\" inch=\"\"\u003eDifferentials and Mods: \u003c\/strong\u003eThis steering system fits stock Dana 30\/44 axles No Flip. If you have done any major modifications give us a ring to discuss. This will fit most modifications, but we want to make sure before shipping.  You may also want to discuss with your local Jeep shop to make sure all your modifications are compatible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"Inch1\" inch=\"\"\u003eIf your jeep has been upgraded to a Dana 60 axle, we have modifications that can work with that as well.\u003c\/p\u003e\n","brand":"Apex Chassis","offers":[{"title":"Default Title","offer_id":47549932568813,"sku":"KIT145-NoFlip-JJSP","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0532\/4265\/9003\/files\/apex-chassis-apex-chassis-heavy-duty-1-ton-tie-rod-drag-link-assembly-in-steel-fits-07-18-jeep-wrangler-jk-jku-rubicon-sahara-sport-note-this-no-flip-kit-fits-vehicles-with-a-lift-of-3-5-inches-or-less-42474247323885.jpg?v=1735129236"}],"url":"https:\/\/teqcustoms.com\/collections\/tie-rods-drag-links.oembed","provider":"TEQ Customs","version":"1.0","type":"link"}