Check out our line of OEM+ Headlights!
Now Offering Build Packages! Bundle and Save!
Adding product to your cart
96-02 3rd Gen 4Runner OEM+ Outboard Shock Mount V2
Shock Fitment Guide
We cannot guarantee which shock diameter or length will fit your current bump stop, wheel offset or tire size since every setup is different, but here are some general guidelines on what we have found to work.
For those of you running stock backspacing (4.75"), we have already seen customers running a 2.0" shock with a small amount of clearance to the stock size tires.
A 2.5" shock diameter will clear the frame. It will also clear most wheel offsets.
This product was designed to be easy to position. There is a driver and a passenger side to the OSM. The arrow cut into the product should be facing towards the front of the vehicle.
Disclaimer and Warranty
By purchasing this product, you agree that TEQ Customs LLC is not liable for any damages to you or your vehicle caused by the installation of the OSM. The product is sold as "Weld On" and you are responsible for ensuring that you or your installer have created quality welds to hold the product in place, that your shock of choice is of the correct length, that you have correctly set your bump stop height and that you have placed the OSM in the correct location. This products is intended for off-road use only.
This product will not increase the amount of travel your axle is able to move. Mounting shocks in a vertical line will decrease amount of travel for the same shock length versus mounting it at an angle inboard of the frame. Your axle travel is limited by the suspension geometry and the size of your shock.
There may be some minor surface imperfections on the product that will not affect the performance of the OSM. If you notice that there is a flaw in the product you received, please contact TEQ Customs LLC immediately to resolve the matter.
No products in the cart.