Trail Link Front SAS Kit "C" / 95-04 Tacoma

Tacoma Trail-Link Front 3-Link Kit

Continuing with the line of Trail-Link kits, Trail-Gear has developed a Front 3 link kit to work with  1995-2004 Toyota Tacomas.This kit is affordable, user friendly, and strong. The Panhard is 1.25” x .250” wall DOM material, the other link material is 2" x .250" wall DOM tubing, and the rod ends are 1.25" Creeper Joints. The Panhard bracket on the axle is 3/16” thick and all other brackets are 1/4” steel, formed and welded. Kit includes all necessary link hardware except for upper shock mounts. Upper shock mount location is determined based on the desired ride height and needs of the vehicle. This kit is designed to work with our True Tacoma width LHD Rock Assault axle P/N 140312-1-KIT and high steer.

Trail-Gear offers four different Tacoma four 3-Link Suspension kits. We feel that offering a selection allows the customer to pick the kit that is best suited and priced for their unique build. All gussets and frame supports are included, so the Tacoma will be much stronger when you finish than it was from the factory. These kits are built by Tacoma owners, for Tacoma owners. If you have any questions you can call our technical support line with confidence that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation.

Details

• All gussets and frame supports are included
• Most complete kit on the market

This kit contains the following components:

• Front Spring Hanger
• All spring and shackle bushings
• Shock Hoops
• 5125 Bilstein Shocks (Your size choice)
• Frame Tube Jigs
• Frame Tubes
• Shackle Mount Kit
• Front Frame Reinforcement Plates (With IFS Box Mount Kit Incorporated)
• Steering shaft
• Steering couplers
• Firewall plate
• Bump stop kit
• Heavy Duty Front Leaf Springs
• Front extended brake line
• Fully loaded left and right calipers
• Left and right caliper hard lines
• Vented brake rotors
• Knuckle service kit with wheel bearings
• U-bolt flip kit
• Tacoma high steer kit (regular high steer kit for 79-85 solid front axles)
• Fully Loaded Six Shooter™ Knuckle Kit
• Knuckle hardware
• 86-88 Power Flow IFS steering box
• Oil pan kit (2.7L or 3.4L)
• Power steering hose conversion kit
• Single t-case crossmember
• Full-color installation instructions
• Rock Assault™ Front Axle Housing
• Rock Assault™ Steering Stops
• Dirty 30s™ 30 Spline Birfield/Axle Kit
• Assembled 3rd Member
• Your choice of a Detroit or ARB Locker

Note: Compressor is included in Kit C w/ARB Locker.

Note: If you have a 3.4L engine, you may need to replace your radiator. See steps 116-120 of the instructions for more information.

Note For SAS Kit A, B, and C: You will need the following components to complete your build:

• (2) Toyota Solid Axle Spindles, 140205-1-KIT
• (2) Brass Spindle Bushings, 140105-1-KIT
• (1) Toyota Solid Axle Hubs (Pair), 140448-1-KIT or 140449-1-KIT
• (2) Aisin Locking Hubs or (1) Creeper Flange Kit, 300468-1-KIT or 140134-1-KIT
• (1) Super Metal Hub Stud Kit, 300578-1-KIT
• (1) Super Metal Spindle Stud Kit, 300573-1-KIT
• (12) Front Wheel Studs, 140392-1-KIT
• (12) Toyota Lug Nuts, 140080-1-KIT
• (4) Steering Stop Bolts
• (1) Set of Wheel Spacers may be required with some rims to clear the brake calipers

Note For SAS Kit A, B, and C: You will need the following components to complete your build:

• (2) Toyota Solid Axle Spindles, 140205-1-KIT
• (2) Brass Spindle Bushings, 140105-1-KIT
• (1) Toyota Solid Axle Hubs (Pair), 140448-1-KIT or 140449-1-KIT
• (2) Aisin Locking Hubs or (1) Creeper Flange Kit, 300468-1-KIT or 140134-1-KIT
• (1) Super Metal Hub Stud Kit, 300578-1-KIT
• (1) Super Metal Spindle Stud Kit, 300573-1-KIT
• (12) Front Wheel Studs, 140392-1-KIT
• (12) Toyota Lug Nuts, 140080-1-KIT
• (4) Steering Stop Bolts
• (1) Set of Wheel Spacers may be required with some rims to clear the brake calipers

Note For The Tacoma Trail-Link Front 3-Link Kit A, B, and C: You will need the following components to complete your build:

• (2) Toyota Solid Axle Spindles, 140205-1-KIT
• (2) Brass Spindle Bushings, 140105-1-KIT
• (2) Toyota Solid Axle Hubs (PN: 140448-1-KIT) or 140449-1-KIT
• (2) Aisin Locking Hub (PN: 300468-1-KIT or (1) Creeper Flange Kit (PN: 140134-1-KIT)
• (1) Super Metal Hub Stud Kit (PN: 300578-1-KIT)
• (1) Super Metal Spindle Stud Kit (PN: 300573-1-KIT)
• (12) Front Wheel Studs (PN: 140392-1-KIT)
• (12) Toyota Lug Nuts (PN: 140080-1-KIT)
• (1) Steering Stop Kit (PN: 303309-1-KIT)
• (1) Set of Wheel Spacers may be required with some rims to clear the brake calipers

Instructions

https://trail-gear.com/media/downloads/pdf/instructions/301012-1-INS.pdf