The Panhard Correction kit from Eimkeith is designed to eliminate the need for an adjustable panhard bar to recenter the axle and return the suspension on lifted vehicles to it’s original geometry....
The solution to your seized cam bolts. Trying to extract seized bushings, sleeves, and bolts sucks. Most of the time, it's cheaper to just cut them out and replace the whole arm. SuperPro arms make...
The Apex Chassis 4Runner KIT410 Heavy Duty Tie Rod Kits are engineered to deliver unparalleled strength and durability for your Toyota 4Runner's steering system. Crafted with precision, these tie r...
Note: 1st Gen Tacomas will require slight clearancing to the sway bar bracket to use the kit
After seeing multiple incidences of failure at the ball joint end of the factory 3rd gen 4Runner lower ...
*Increases stability and suspension travel
*Can fit up to 12" shocks, 2.5" or 2.0" (Note: many 1G Taco owners limit bump travel, which might be needed for 2.5"x12" shocks)
*Requires hose remote re...
MADE IN USA!!
Archive's Stealth HD U-bolt flip kit fits stock 60mm (2.375") to 2.5" wide springs max, bolts are kept tight to pack to prevent your leaves from rotating out of alignment.
This kit ...
Check out the ALL-NEW 2024 Lexus GX 550 Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized fini...
The Apex Chassis Tacoma KIT400 Heavy Duty Tie Rod Kits are engineered to deliver unparalleled strength and durability for your Toyota Tacoma's steering system. Crafted with precision, these tie rod...
NEW:
-Boomerang shackles for bolt clearance w/ long springs
-Revised 2WD-->4WD conversion template locates off of frame features
Video----> Archive Garage Front Shackle Hangers
-Fits Dodge R...
Fits 1972-1993 Dodge Ram trucks W150 W250 W350 and Ramcharger Trailduster. Mounts stock springs (48") & aftermarket or up to 52" springs (see bolt diagram). This bracket is great for 4x4 conver...
So you have your LLS (Lower Link Mount Reinforcement Skids) welded on and you’re good to go, right? Yep.– Until you twist and tear your axle side upper link mount!
To combat this, eimkeith mad...
Fits: 4th & 5th Gen 4Runner / GX470 & GX460 / FJ Cruiser / Prado 150(Not for Gen 3)
What It Does
Fixes that sketchy, side-to-side axle swing after a lift.
Brings your track bar (panha...
Bushing kits to fit a 5/8" bolt WITH a DOM bolt sleeve in a 1" or 1.25" spring eye!
1 kit services 2 spring eyes, 2 Kits - (4 Spring Eyes), 4 Kits - (8 Spring Eyes)
For each kit, you will receiv...
Our new adjustable MD/HD 7/1 packs (shipped as 7/1) allows you to go back and forth between MD and HD rates. 2 packs in 1, no more worry about which to buy!
Leaving the 7th leaf installed, gives ...
MADE IN USA!!
Archive's Stealth HD U-bolt flip kit fits stock 60mm (2.375") to 2.5" wide springs max, bolts are kept tight to pack to prevent your leaves from rotating out of alignment.
This kit ...
The solution to your seized cam bolts. Trying to extract seized bushings, sleeves, and bolts sucks. Most of the time, it's cheaper to just cut them out and replace the whole arm. SuperPro arms make...
Check out the ALL-NEW 6th Gen 2025 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black ano...
The best deal for an assembled 5100 kit on the market!
*Does not fit 5 lug models*
We take the hard work out of upgrading your suspension- all struts will ship fully assembled, ready to bolt on to ...
Archive Explorer Series Tacoma leaf packs are designed for severe duty off road travel. Made in USA with 5160 steel, tip insert pads, full military wrap yet won't scrape hanger, bolted spring clips...
Great option for the 2nd and 3rd gen Tacoma owners who need articulation for their trail or rock focused rig but don't need 2.5" shocks. Trail Series 2.0" relocation kit delivers renowned Archive q...
*Increases stability and suspension travel
*Can fit up to 12" shocks, 2.5" or 2.0" (Note: many 3G T4R owners limit bump travel, which might be needed for 2.5"x12" shocks)
*Requires hose remote res...
PB59-1101K
For any lift height, or no lift. These are OE replacement bushings.
Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
Pressing of OE bushings may be ne...
