*In Stock and Ready to Ship with Free Shipping*
Here at TEQ Customs, we're numbers guys. So when we found out that a 40 dollar mod could save us thousands, we were all in. Keep reading to see how!
...
96-02 3rd Gen 4Runner OEM+ Outboard Shock Mount V2
In collaboration with Curtis Cross, the OEM+ Outboard Shock Mount (OSM) is designed to move the shock mounting location outside of the frame. Unl...
The Panhard Correction kit from Eimkeith is designed to eliminate the need for an adjustable panhard bar to recenter the axle and return the suspension on lifted vehicles to it’s original geometry....
Restore your suspension, ride quality, handling, and off road capability after lifting your Toyota by installing these custom made sway bar links!
*A sway bar relocation is recommended where appl...
Experience the difference with DuroBumps premium off-road bump stops, proudly made in the USA. These rear 3rd Gen 4runner extended bump stops feature dual durometer rubber, providing smooth, pro...
DuroBumps are quality made in the USA with dual durometer (hardness) rubber, to deliver smooth, progressive dampening that reduces hard bottom-outs significantly and allows for greater control and...
*BUMP STOPS NOT INCLUDED BY DEFAULT*
The TKO 3G4R Hydraulic Bump Stop Kit provides a plug and play bump stop system in the rear of 3rd Gen 4Runners. The Bump Stop intended to be used (2″x2″...
Trail-Gear Rock Assault 6-Ply Limit Straps
Trail-Gear introduces the industry’s first 6-layer, 1.75” nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that h...
WIY (Weld It Yourself) plates for adding hydraulic bump stops to the front of your Long Travelled 3rd Gen 4Runner or 1st Gen Tacoma.
These plates are made for Pin Style Bump Stops but can ...
*Increases stability and suspension travel
*Can fit up to 12" shocks, 2.5" or 2.0" (Note: many 3G T4R owners limit bump travel, which might be needed for 2.5"x12" shocks)
*Requires hose remote res...
Please allow up to 10 days for shipment of new orders | Each order is for a pair of PerryParts Bump Stops
This vehicle has mounts for 4 front bump stops. We recommend you start with 1 order of Per...
Move the shocks where they should've been in the first place, to the outside of the frame. The FGP "OSR" allows for longer shocks, makes shock install/removal a breeze, and greatly improves the eff...
*Custom lengths available upon request*
A simple, yet affective product that will take out all the guess work.
If you've ever installed limit straps I'm sure you've found its fairly difficult to ge...
The Extended Outboard Shock Relocation, aka the OSR+ kit, is the same as the standard OSR except that the hoop is 1.5 inches taller, which means that the entire shock body is mounted higher compare...
Protect your rear axle and add serious strength without sacrificing ground clearance. These Rear Axle Bash Plates (ABP) effectively doubles the thickness of the lower section of your 8” axle housin...
The KD "Killdozer" Crossmember Reinforcement is designed to protect/reinforce the front crossmember and add gusseted support to the control arm mounts on 96-02 3rd Gen 4Runners. This reinforcement ...
Filter Products By Vehicle
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
